[TOC]
### 1.1 What is RT809H?
RT809H is a kind of cost-effective,reliable and fast universal programmer series,suitable for all the computers or laptops based on Pentium IV processors or the better processors.When working it can communicate with the USB2.0 fast port of computer directly,with driver program inside software,which makes installing operation more convenient.
### 1.2 Programmer Characteristic:
* Supporting Windows XP,Windows Vista,Windows 7,windows 8 and windows 10
* Do not need external power source,with low-power consumption,can be used as VGA signal generator,easy to repair.
* With Intellisense functionality,when reading and writing most types of chip off line, it support the function of intelligent identification and being put at will.
* Support 24/25/93/95 series serial SPI Flash. EEPROM offline read and write.
* Support 26/27/28/29/30/39/49/50 series NOR Flash/ PROM read and write;
* Support TSOP48/BGA footprint NAND Flash parameter automatic identification and offline reading;
* Support the mainstream device,including E/EPROM、MCU、EC、SPI NOR flash、parallel NOR flash、SPI NAND、parallel NAND、ONENAND、MCP、EMMC、EMCP,etc.
| | |
| --- | --- |
| NAND_AUTO | Can recognize most of the NAND and go on to read and write. |
| EMMC_AUTO | Using BGA socket,supporting EMMC off-line fast read-writing(8bit main line) |
| EMMC_AUTO_4BIT |Using BGA socket,supporting EMMC off-line fast read-writing(4bit main line)|
| EMMC_AUTO_ISP | Read-write EMMC with flying line way.(1bit main line) |
| | |
Support the EMMC recognition in the on-line or off-line way,BOOT/USER/RPOM/GPP area read and write.
* I2C/ serial port ISP has strong function,compatible with most of the LCD chip scheme,can check the printing information on line,read and write NOR/NAND/EMMC chip on line,read and write the EC chip of laptop on line or off line.
* Support the IT8/KB90/NPCE/NEC16 series of laptop mainboard’s EC chip to read and write.
* High-speed USB port,USB driver with WHQL certification,the reading and writing speed can be as much as 25 MB/S.
* Full driver structure,free software upgrade,the universal switch socket to reduce the using cost for the user.
### 1.3 Instruction Tissue
This instruction consists of three parts:
The part one is to introduce RT809H,including the system requirement,software and hardware installing,etc ;
The part two is the detailed instruction of software commands and each function;
The part three is appendix,including the user support and the wrong message.
### 1.4 System Requirement
Minimum system configuration:
- Pentium IV and above compatibles,desktop or laptop computer,at least a universal serial main line port conform to USB2.0 high-speed standard.
- Windows XP/Vista operating system.
- The hard disk with at least 1G free space.
### 1.5 Programmer External Port Instruction
- Front view : HMI is reserved man-machine port,also be used by the footprint chip of TSOP56,BGA64,etc.
- DC lateral view : Except the USB outlet connected to the computer,there is a DC power supply outlet,9-12V power supply range(negative electrode outside and positive electrode inside),switching automatically between external power source and USB power supply.
(Please use the power of good quality,or the programmer will may be damaged and no warranty.)
- Flashing port lateral view:
- Port instruction:
- The leftmost button is the power button, also as the VGA signal switching button;
- The IDC10 black outlet at the middle is ISP port,the main function is ISP of all sorts of MCU and flying line to read and write EMMC,etc.Use the Dupont line to connect this port with the key signal of the board waiting for flashing, one to one correspondence connection.
- “VGA ISP”can be used as VGA signal output,be connected with the VGA port of the board when flashing.
- “VGA IN”is the VGA signal input,can be connected with the computer graphics.
When unconnected,VGA ISP will output the VGA signal produced by itself;
When connected,VGA ISP output the computer graphics signal;
- “HDMI Digital high-definition interface”can connect with the HMDI port of the flashing board.
### 1.6 Programmer Packing
- The standard packing:
Programmer mainframe 1
DIP 48 pin simple soldering board 1
SOP simple soldering board 1
USB2.0 high-speed cable 1
VGA connecting line 1
- Note
- Manual Organization
- ⅠGeneral Description
- 1.1 What is RT809H?
- 1.2 Programmer Characteristic:
- 1.3 System Requirement
- 1.4 Programmer External Port Instruction
- 1.5 Programmer Packing
- Ⅱ Installing
- 2.1 Software download
- 2.2 Installing the Main Software
- 2.3 Manual Installing the drivers
- 2.4 Installing tool chain panel
- Ⅲ The Software Instruction
- 3.1 Software Interface Instruction
- 3.2 The Toolchain
- Ⅳ Detailed Operation
- 4.1 24XX,25XX,93XX Series Chips’ Reading and Writing
- 4.1.1 93XX’s Reading and Writing
- 4.1.2 24XX,25XX’s Reading and Writing
- 4.2 PLCC Encapsulation Chip’s Reading and Writing
- 4.3 TSOP48 Encapsulation Chip’s Reading and Writing
- 4.4 EMMC’s Reading
- 4.5 Laptop EC Chip’s Reading and Writing
- 4.5.1 1:85XX Series EC Chip’s Reading and Writing
- 4.5.2 KB9012 Chip’s Reading and Writing
- 4.5.3 NPCE 288,388 Chip’s Reading and Writing
- Ⅴ ISP (on-line) Application Instruction
- 5.1 Checking Liquid Crystal Board Printing Message
- 5.2 LCD TV Mainboard Program’s Transcription
- 5.2.1 MST scheme
- 5.2.2 Burning Method
- 5.2.3 MTK Scheme Flashing Method
- 5.2.4 RTD Scheme
- 5.2.5 EMMC_ISP Reading and Writing Tutorial
- 5.2.6 On-line Reading IT85XX Series Laptop EC Chip
- Ⅵ Laptop EC Chip MEC16xx Read-Write
- Ⅶ Secure CRT Software Installation
- Ⅷ Common Problem Diagnosis
- 8.1 Installing the software and driver unsuccessfully
- 8.2 Programmer Unconnected with the Mainframe
- 8.3 The use of programmer selftest command,to check if there is problem itself
- 8.3.1 Selftest way 1:
- 8.3.2 Selftest way 2 :
- 8.4 The Method of Solving the Problem When reading 25XX,24XX,93XX
- 8.4.1 Handling Method
- 8.5 The Method to Solve the Problem of Off-line Read and Write EMMC
- 8.6 The Method to Deal with the LCD Mainboard Printing Information Messy Code
- Ⅸ Guarantee clause：
- Ⅹ Contact Information
- Self-testing