Step 1 : Click,the software appear;
Step 2 : Click;
Step 3 : Click the “fast connect” icon in the middle in the following picture.
Step 4 : Choose “Serial”in the protocol;
Step 5 : The port should be selected the same with it in device manager;
Step 6 : After choosing click “Connect”,this computer use COM4,after finishing setting click “Connect”,once connect successfully there will be hint;
Connect normally:
- Note
- Manual Organization
- ⅠGeneral Description
- 1.1 What is RT809H?
- 1.2 Programmer Characteristic:
- 1.3 System Requirement
- 1.4 Programmer External Port Instruction
- 1.5 Programmer Packing
- Ⅱ Installing
- 2.1 Software download
- 2.2 Installing the Main Software
- 2.3 Manual Installing the drivers
- 2.4 Installing tool chain panel
- Ⅲ The Software Instruction
- 3.1 Software Interface Instruction
- 3.2 The Toolchain
- Ⅳ Detailed Operation
- 4.1 24XX,25XX,93XX Series Chips’ Reading and Writing
- 4.1.1 93XX’s Reading and Writing
- 4.1.2 24XX,25XX’s Reading and Writing
- 4.2 PLCC Encapsulation Chip’s Reading and Writing
- 4.3 TSOP48 Encapsulation Chip’s Reading and Writing
- 4.4 EMMC’s Reading
- 4.5 Laptop EC Chip’s Reading and Writing
- 4.5.1 1:85XX Series EC Chip’s Reading and Writing
- 4.5.2 KB9012 Chip’s Reading and Writing
- 4.5.3 NPCE 288,388 Chip’s Reading and Writing
- Ⅴ ISP (on-line) Application Instruction
- 5.1 Checking Liquid Crystal Board Printing Message
- 5.2 LCD TV Mainboard Program’s Transcription
- 5.2.1 MST scheme
- 5.2.2 Burning Method
- 5.2.3 MTK Scheme Flashing Method
- 5.2.4 RTD Scheme
- 5.2.5 EMMC_ISP Reading and Writing Tutorial
- 5.2.6 On-line Reading IT85XX Series Laptop EC Chip
- Ⅵ Laptop EC Chip MEC16xx Read-Write
- Ⅶ Secure CRT Software Installation
- Ⅷ Common Problem Diagnosis
- 8.1 Installing the software and driver unsuccessfully
- 8.2 Programmer Unconnected with the Mainframe
- 8.3 The use of programmer selftest command,to check if there is problem itself
- 8.3.1 Selftest way 1:
- 8.3.2 Selftest way 2 :
- 8.4 The Method of Solving the Problem When reading 25XX,24XX,93XX
- 8.4.1 Handling Method
- 8.5 The Method to Solve the Problem of Off-line Read and Write EMMC
- 8.6 The Method to Deal with the LCD Mainboard Printing Information Messy Code
- Ⅸ Guarantee clause：
- Ⅹ Contact Information
- Self-testing