Key point:“ISP automatic identification”“Open”the file waiting for burning“Write”
Step 1 : The VGA ISP port should be connected with board correctly by VGA line.Open the software to the main interface,first click,then charge the mainboard(Keeping booting up,both with standby power supply and main power supply),then it will hint to detect the type of main chip.
Step 2 : Select the program file waiting for burning;
Step 3 : Setting the data reconstitution function to reserve the information like original MAC address and so on;
Step 4 : Click the,recombine the data automatically,erase,write,verify,you just need to wait for finishing.
- Note
- Manual Organization
- ⅠGeneral Description
- 1.1 What is RT809H?
- 1.2 Programmer Characteristic:
- 1.3 System Requirement
- 1.4 Programmer External Port Instruction
- 1.5 Programmer Packing
- Ⅱ Installing
- 2.1 Software download
- 2.2 Installing the Main Software
- 2.3 Manual Installing the drivers
- 2.4 Installing tool chain panel
- Ⅲ The Software Instruction
- 3.1 Software Interface Instruction
- 3.2 The Toolchain
- Ⅳ Detailed Operation
- 4.1 24XX,25XX,93XX Series Chips’ Reading and Writing
- 4.1.1 93XX’s Reading and Writing
- 4.1.2 24XX,25XX’s Reading and Writing
- 4.2 PLCC Encapsulation Chip’s Reading and Writing
- 4.3 TSOP48 Encapsulation Chip’s Reading and Writing
- 4.4 EMMC’s Reading
- 4.5 Laptop EC Chip’s Reading and Writing
- 4.5.1 1:85XX Series EC Chip’s Reading and Writing
- 4.5.2 KB9012 Chip’s Reading and Writing
- 4.5.3 NPCE 288,388 Chip’s Reading and Writing
- Ⅴ ISP (on-line) Application Instruction
- 5.1 Checking Liquid Crystal Board Printing Message
- 5.2 LCD TV Mainboard Program’s Transcription
- 5.2.1 MST scheme
- 5.2.2 Burning Method
- 5.2.3 MTK Scheme Flashing Method
- 5.2.4 RTD Scheme
- 5.2.5 EMMC_ISP Reading and Writing Tutorial
- 5.2.6 On-line Reading IT85XX Series Laptop EC Chip
- Ⅵ Laptop EC Chip MEC16xx Read-Write
- Ⅶ Secure CRT Software Installation
- Ⅷ Common Problem Diagnosis
- 8.1 Installing the software and driver unsuccessfully
- 8.2 Programmer Unconnected with the Mainframe
- 8.3 The use of programmer selftest command,to check if there is problem itself
- 8.3.1 Selftest way 1:
- 8.3.2 Selftest way 2 :
- 8.4 The Method of Solving the Problem When reading 25XX,24XX,93XX
- 8.4.1 Handling Method
- 8.5 The Method to Solve the Problem of Off-line Read and Write EMMC
- 8.6 The Method to Deal with the LCD Mainboard Printing Information Messy Code
- Ⅸ Guarantee clause：
- Ⅹ Contact Information
- Self-testing