用AI赚第一桶💰低成本搭建一套AI赚钱工具,源码可二开。 广告
## 映射容器端口到宿主主机的实现 默认情况下,容器可以主动访问到外部网络的连接,但是外部网络无法访问到容器。 ### 容器访问外部实现 容器所有到外部网络的连接,源地址都会被NAT成本地系统的IP地址。这是使用 `iptables` 的源地址伪装操作实现的。 查看主机的 NAT 规则。 ``` $ sudo iptables -t nat -nL ... Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- 172.17.0.0/16 !172.17.0.0/16 ... ``` 其中,上述规则将所有源地址在 `172.17.0.0/16` 网段,目标地址为其他网段(外部网络)的流量动态伪装为从系统网卡发出。MASQUERADE 跟传统 SNAT 的好处是它能动态从网卡获取地址。 ### 外部访问容器实现 容器允许外部访问,可以在 `docker run` 时候通过 `-p` 或 `-P` 参数来启用。 不管用那种办法,其实也是在本地的 `iptable` 的 nat 表中添加相应的规则。 使用 `-P` 时: ``` $ iptables -t nat -nL ... Chain DOCKER (2 references) target prot opt source destination DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:49153 to:172.17.0.2:80 ``` 使用 `-p 80:80` 时: ``` $ iptables -t nat -nL Chain DOCKER (2 references) target prot opt source destination DNAT tcp -- 0.0.0.0/0 0.0.0.0/0 tcp dpt:80 to:172.17.0.2:80 ``` 注意: * 这里的规则映射了 0.0.0.0,意味着将接受主机来自所有接口的流量。用户可以通过 `-p IP:host_port:container_port` 或 `-p IP::port` 来指定允许访问容器的主机上的 IP、接口等,以制定更严格的规则。 * 如果希望永久绑定到某个固定的 IP 地址,可以在 Docker 配置文件 `/etc/default/docker` 中指定 `DOCKER_OPTS="--ip=IP_ADDRESS"`,之后重启 Docker 服务即可生效。