* The material connection picture of S3F9454/S3F9498 with RT809F
The connection definition of S3F series with ICSP port board
* Recommend : Connect the VPP pin with a 104 tile capacitor to the ground and series connect a Schottky diode on the VDD line,such as 1N5819,SS14 and so on.Connect the positive pole to the ICSP port board,the negative pole to the side of VDD pin of MCU,which can avoid the VPP pin of MCU to break down the VDD pin because of the poor connection of GND ground line.
* There is another commonsense problem : Relevant pins of MCU must be connected well with ICSP board,and insert the ICSP board on the programmer then choose corresponding type to read and write.If to insert the ICSP board in the locking socket first and then connect MCU pin,it is easy to burn the MCU.
* S3F9454 on line read&write connection definition
* S3F9498 on line read&write connection definition
S3F9488 on line read&write connection definition
- Copyright Statement
- ⅠGeneral Description
- 1.1 Brief
- 1.1.1 What is RT809F?
- 1.1.2 Programmer Characteristic:
- 1.1.3 Instruction Tissue
- 1.1.4 System Requirement
- 1.1.5 Programmer External Port Instruction
- 1.1.6 Programmer Packing
- Ⅱ Software Installation
- 2.1 Software downloading
- 2.2 Software installing
- 2.3 Installing the third-party toolchain patch
- 2.4 Driver installation
- Ⅲ The Software Instruction
- Ⅳ Detailed Operation
- 4.1 93XX,24XX,25XX Chips’ Reading and Writing
- 4.1.1 The putting place of different chips
- 4.1.2 Choose the chip types
- 4.1.3 93XX,24XX,25XX series chips reading
- 4.1.4 93XX,25XX,24XX series chips writing
- 4.2 Laptop KB90XX series EC chip’s writing off line
- 4.3 PLCC 32 pins chip’s reading and writing
- 4.4 TSOP 48 pins chip’s reading and writing
- 4.5 Write the 85 series EC chip off line
- 4.6 Write the IT85XX Series Laptop EC Chip on Line
- 4.6.1 Reading data
- 4.6.2 Writing data
- 4.7 Laptop EC Chip MEC1633 Read&Write by Flying Line
- 4.8 Laptop EC Chip KB90 Series off Line Read&Write
- 4.9 Laptop EC Chip KB90XX Series Reading by Flying Line
- 4.10 BUF16821 TCON Board GAMMA Voltage Producing Chip Read&Write on Line
- 4.10.1 Board Number
- 4.10.2 Chip Instruction
- 4.10.3 Line Connection Mode
- 4.10.4 Notes
- 4.10.5 Reading Operation
- 4.10.6 Writing Operation
- 4.11 EPM3064A Read&Write
- 4.11.1 Chip Instruction
- 4.11.2 Reading operation
- 4.11.3 Writing Operation
- 4.12 S3F Series Samsung Singlechip’s Reading and Writing
- 4.12.1 Program Data Source
- 4.12.2 Preparation
- 4.12.3 Attention:
- 4.12.4 Connection diagram and connection definition
- 4.12.5 Reading Operation
- 4.12.6 Writing Operation
- 4.13 AT45DB Series SPI Flash Read&Write —— AT45DB081D for example
- 4.13.1 Read&Write Connection Diagram
- 4.13.2 Reading Operation
- 4.13.3 Writing Operation
- 4.14 PIC 12F Series SCM’s Reading and Writing
- 4.14.1 Board Number
- 4.14.2 PIC Series Instruction
- 4.14.3 Program Data Source
- 4.14.4 Preparing
- 4.14.5 Attention
- 4.14.6 Reading Operation
- 4.14.7 Writing Operation
- 4.15 RT809F Checking the Printing Information of LCD Board
- 4.15.1 Software Setting
- 4.15.2 Flying line
- 4.15.3 Operation Step
- 4.15.4 Checking the printing information using Secure CRT