ThinkSSL🔒 一键申购 5分钟快速签发 30天无理由退款 购买更放心 广告
### 概述              Nginx 是使用一个 master 进程来管理多个 worker 进程提供服务。master 负责管理 worker 进程,而 worker 进程则提供真正的客户服务,worker 进程的数量一般跟服务器上 CPU 的核心数相同,worker 之间通过一些进程间通信机制实现负载均衡等功能。Nginx 进程之间的关系可由下图表示:  ![](https://box.kancloud.cn/2016-09-01_57c7edce687dc.jpg)           Nginx 服务启动时会读入配置文件,后续的行为则按照配置文件中的指令进行。Nginx 的配置文件是纯文本文件,默认安装 Nginx 后,其配置文件均在 /usr/local/nginx/conf/ 目录下。其中,nginx.conf  为主配置文件。配置文件中以 # 开始的行,或者是前面有若干空格或者 TAB 键,然后再跟 # 的行,都被认为是注释。这里只是了解主配置文件的结构。       Nginx 配置文件是以 block(块)形式组织,每个 block 都是以一个块名字和一对大括号 “{}” 表示组成,block 分为几个层级,整个配置文件为 main 层级,即最大的层级;在 main 层级下可以有 event、http 、mail 等层级,而 http 中又会有 server block,server block中可以包含 location block。即块之间是可以嵌套的,内层块继承外层块。最基本的配置项语法格式是“配置项名  配置项值1  配置项值2  配置项值3  ... ”;       每个层级可以有自己的指令(Directive),例如 worker_processes 是一个main层级指令,它指定 Nginx 服务的 Worker 进程数量。有的指令只能在一个层级中配置,如worker_processes 只能存在于 main 中,而有的指令可以存在于多个层级,在这种情况下,子 block 会继承 父 block 的配置,同时如果子block配置了与父block不同的指令,则会覆盖掉父 block 的配置。指令的格式是“指令名 参数1 参数2 … 参数N;”,注意参数间可用任意数量空格分隔,最后要加分号。       下图是 Nginx 配置文件通常结构图示。 ![](https://box.kancloud.cn/2016-09-01_57c7edce82018.jpg) ### Nginx 服务的基本配置项       Nginx 服务运行时,需要加载几个核心模块和一个事件模块,这些模块运行时所支持的配置项称为基本配置;基本配置项大概可分为以下四类: - 用于调试、定位的配置项; - 正常运行的必备配置项; - 优化性能的配置项; - 事件类配置项; 各个配置项的具体实现如下: ~~~ /* Nginx 服务基本配置项 */ /* 用于调试、定位的配置项 */ #以守护进程 Nginx 运行方式 #语法:daemon off | on; #默认:daemon on; #master / worker 工作方式 #语法:master_process on | off; #默认:master_process on; #error 日志设置 # 路径 错误级别 #语法:error_log /path/file level; #默认:error_log logs/error.log error; #其中/path/file是一个具体文件;level是日志的输出级别,其取值如下: # debug info notice warn error crit alert emerg #从左至右级别增大;若设定一个级别后,则在输出的日志文件中只输出级别大于或等于已设定的级别; #处理特殊调试点 #语法:debug_points [stop | abort] #这个设置是来跟踪调试 Nginx 的; #仅对指定的客户端输出 debug 级别的日志 #语法:debug_connection [IP | DIR] #限制 coredump 核心转储文件的大小 #语法:worker_rlimit_core size; #指定 coredump 文件的生成目录 #语法:working_directory path; /* 正常运行的配置项 */ #定义环境变量 #语法:env VAR | VAR=VALUE; #VAR 是变量名,VALUE 是目录; #嵌入其他配置文件 #语法:include /path/file; #include 配置项可以将其他配置文件嵌入到 Nginx 的 nginx.conf 文件中; #pid 的文件路径 #语法:pid path/file; #默认:pid logs/nginx.pid; #保存 master 进程 ID 的 pid 文件存放路径; #Nginx worker 运行的用户及用户组 #语法:user username [groupname]; #默认:user nobody nobody; #指定 Nginx worker进程可打开最大句柄个数 #语法:worker_rlimit_nofile limit; #限制信号队列 #语法:worker_rlimit_sigpending limit; #设置每个用户发给 Nginx 的信号队列大小,超出则丢弃; /* 优化性能配置项 */ #Nginx worker 进程的个数 #语法:worker_process number; #默认:worker_process 1; #绑定 Nginx worker 进程到指定的 CPU 内核 #语法:worker_cpu_affinity cpumask [cpumask...] #SSL 硬件加速 #语法:ssl_engine device; #系统调用 gettimeofday 的执行频率 #语法:timer_resolution t; #Nginx worker 进程优先级设置 #语法:worker_priority nice; #默认:worker_priority 0; /* 事件类配置项 */ #一般有以下几种配置: #1、是否打开accept锁 # 语法格式:accept_mutex [on | off]; #2、lock文件的路径 # 语法格式:lock_file path/file; #3、使用accept锁后到真正建立连接之间的延迟时间 # 语法格式:accept_mutex_delay Nms; #4、批量建立新连接 # 语法格式:multi_accept [on | off]; # #5、选择事件模型 # 语法格式:use [kqueue | rtisg | epoll | /dev/poll | select | poll | eventport]; #6、每个worker进行的最大连接数 # 语法格式:worker_connections number; ~~~ HTTP 核心模块的配置 具体可以参看《[Nginx 中 HTTP 核心模块配置](http://nginx.org/en/docs/http/ngx_http_core_module.html)》 ~~~ /* HTTP 核心模块配置的功能 */ /* 虚拟主机与请求分发 */ #监听端口 #语法:listen address:port[default | default_server | [backlong=num | rcvbuf=size | sndbuf=size | # accept_filter | deferred | bind | ipv6only=[on | off] | ssl]]; # 默认:listen:80; # 说明: # default或default_server:将所在的server块作为web服务的默认server块;当请求无法匹配配置文件中的所有主机名时,就会选择默认的虚拟主机; # backlog=num:表示 TCP 中backlog队列存放TCP新连接请求的大小,默认是-1,表示不予设置; # rcvbuf=size:设置监听句柄SO_RCVBUF的参数; # sndbuf=size:设置监听句柄SO_SNDBUF的参数; # accept_filter:设置accept过滤器,只对FreeBSD操作系统有用; # deferred:设置该参数后,若用户发起TCP连接请求,并且完成TCP三次握手,但是若用户没有发送数据,则不会唤醒worker进程,直到发送数据; # bind:绑定当前端口 / 地址对,只有同时对一个端口监听多个地址时才会生效; # ssl:在当前端口建立的连接必须基于ssl协议; #配置块范围:server #主机名称 #语法:server_name name[...]; #默认:server_name ""; #配置块范围:server #server name 是使用散列表存储的 #每个散列桶占用内存大小 #语法:server_names_hash_bucket_size size; #默认:server_names_hash_bucker_size 32|64|128; # #散列表最大bucket数量 #语法:server_names_hash_max_size size; #默认:server_names_hash_max_size 512; #默认:server_name_in_redirect on; #配置块范围:server、http、location #处理重定向主机名 #语法:server_name_in_redirect on | off; #默认:server_name_in_redirect on; #配置块范围:server、http、location #location语法:location[= | ~ | ~* | ^~ | @] /uri/ {} #配置块范围:server #location尝试根据用户请求中的URI来匹配 /uri表达式,若匹配成功,则执行{}里面的配置来处理用户请求 #以下是location的一般配置项 #1、以root方式设置资源路径 # 语法格式:root path; #2、以alias方式设置资源路径 # 语法格式:alias path; #3、访问首页 # 语法格式:index file...; #4、根据HTTP返回码重定向页面 # 语法格式:error_page code [code...] [= | =answer-code] uri | @named_location; #5、是否允许递归使用error_page # 语法格式:recursive_error_pages [on | off]; #6、try_files # 语法格式:try_files path1 [path2] uri; /* 文件路径的定义 */ #root方式设置资源路径 #语法:root path; #默认:root html; #配置块范围:server、http、location、if #以alias方式设置资源路径 #语法:alias path; #配置块范围:location #访问主页 #语法:index file...; #默认:index index.html; #配置块范围:http、server、location #根据HTTP返回码重定向页面 # 语法:error_page code [code...] [= | =answer-code] uri | @named_location; #配置块范围:server、http、location、if #是否允许递归使用error_page # 语法:recursive_error_pages [on | off]; #配置块范围:http、server、location #try_files # 语法:try_files path1 [path2] uri; #配置块范围:server、location /* 内存及磁盘资源分配 */ # HTTP 包体只存储在磁盘文件中 # 语法:client_body_in_file_only on | clean | off; # 默认:client_body_in_file_only off; # 配置块范围:http、server、location # HTTP 包体尽量写入到一个内存buffer中 # 语法:client_body_single_buffer on | off; # 默认:client_body_single_buffer off; # 配置块范围:http、server、location # 存储 HTTP 头部的内存buffer大小 # 语法:client_header_buffer_size size; # 默认:client_header_buffer_size 1k; # 配置块范围:http、server # 存储超大 HTTP 头部的内存buffer大小 # 语法:large_client_header_buffer_size number size; # 默认:large_client_header_buffer_size 4 8k; # 配置块范围:http、server # 存储 HTTP 包体的内存buffer大小 # 语法:client_body_buffer_size size; # 默认:client_body_buffer_size 8k/16k; # 配置块范围:http、server、location # HTTP 包体的临时存放目录 # 语法:client_body_temp_path dir-path [level1 [level2 [level3]]]; # 默认:client_body_temp_path client_body_temp; # 配置块范围:http、server、location # 存储 TCP 成功建立连接的内存池大小 # 语法:connection_pool_size size; # 默认:connection_pool_size 256; # 配置块范围:http、server # 存储 TCP 请求连接的内存池大小 # 语法:request_pool_size size; # 默认:request_pool_size 4k; # 配置块范围:http、server /* 网络连接设置 */ # 读取 HTTP 头部的超时时间 # 语法:client_header_timeout time; # 默认:client_header_timeout 60; # 配置块范围:http、server、location # 读取 HTTP 包体的超时时间 # 语法:client_body_timeout time; # 默认:client_body_timeout 60; # 配置块范围:http、server、location # 发送响应的超时时间 # 语法:send_timeout time; # 默认:send_timeout 60; # 配置块范围:http、server、location # TCP 连接的超时重置 # 语法:reset_timeout_connection on | off; # 默认:reset_timeout_connection off; # 配置块范围:http、server、location # 控制关闭 TCP 连接的方式 # 语法:lingering_close off | on | always; # 默认:lingering_close on; # 配置块范围:http、server、location # always 表示关闭连接之前无条件处理连接上所有用户数据; # off 表示不处理;on 一般会处理; # lingering_time # 语法:lingering_time time; # 默认:lingering_time 30s; # 配置块范围:http、server、location # lingering_timeout # 语法:lingering_timeout time; # 默认:lingering_time 5s; # 配置块范围:http、server、location # 对某些浏览器禁止keepalive功能 # 语法:keepalive_disable [mise6 | safari | none]... # 默认:keepalive_disable mise6 safari; # 配置块范围:http、server、location # keepalive超时时间 # 语法:keepalive_timeout time; # 默认:keepalive_timeout 75; # 配置块范围:http、server、location # keepalive长连接上允许最大请求数 # 语法:keepalive_requests n; # 默认:keepalive_requests 100; # 配置块范围:http、server、location # tcp_nodelay # 语法:tcp_nodelay on | off; # 默认:tcp_nodelay on; # 配置块范围:http、server、location # tcp_nopush # 语法:tcp_nopush on | off; # 默认:tcp_nopush off; # 配置块范围:http、server、location /* MIME 类型设置 */ # MIME type 与文件扩展的映射 # 语法:type{...} # 配置块范围:http、server、location # 多个扩展名可映射到同一个 MIME type # 默认 MIME type # 语法:default_type MIME-type; # 默认:default_type text/plain; # 配置块范围:http、server、location # type_hash_bucket_size # 语法:type_hash_bucket_size size; # 默认:type_hash_bucket_size 32 | 64 | 128; # 配置块范围:http、server、location # type_hash_max_size # 语法:type_hash_max_size size; # 默认:type_hash_max_size 1024; # 配置块范围:http、server、location /* 限制客户端请求 */ # 按 HTTP 方法名限制用户请求 # 语法:limit_except method...{...} # 配置块:location # method 的取值如下: # GET、HEAD、POST、PUT、DELETE、MKCOL、COPY、MOVE、OPTIONS、 # PROPFIND、PROPPATCH、LOCK、UNLOCK、PATCH # HTTP 请求包体的最大值 # 语法:client_max_body_size size; # 默认:client_max_body_size 1m; # 配置块范围:http、server、location # 对请求限制速度 # 语法:limit_rate speed; # 默认:limit_rate 0; # 配置块范围:http、server、location、if # 0 表示不限速 # limit_rate_after规定时间后限速 # 语法:limit_rate_after time; # 默认:limit_rate_after 1m; # 配置块范围:http、server、location、if /* 文件操作的优化 */ # sendfile系统调用 # 语法:sendfile on | off; # 默认:sendfile off; # 配置块:http、server、location # AIO 系统调用 # 语法:aio on | off; # 默认:aio off; # 配置块:http、server、location # directio # 语法:directio size | off; # 默认:directio off; # 配置块:http、server、location # directio_alignment # 语法:directio_alignment size; # 默认:directio_alignment 512; # 配置块:http、server、location # 打开文件缓存 # 语法:open_file_cache max=N [inactive=time] | off; # 默认:open_file_cache off; # 配置块:http、server、location # 是否缓存打开文件的错误信息 # 语法:open_file_cache_errors on | off; # 默认:open_file_cache_errors off; # 配置块:http、server、location # 不被淘汰的最小访问次数 # 语法:open_file_cache_min_user number; # 默认:open_file_cache_min_user 1; # 配置块:http、server、location # 检验缓存中元素有效性的频率 # 语法:open_file_cache_valid time; # 默认:open_file_cache_valid 60s; # 配置块:http、server、location /* 客户请求的特殊处理 */ # 忽略不合法的 HTTP 头部 # 语法:ignore_invalid_headers on | off; # 默认:ignore_invalid_headers on; # 配置块:http、server # HTTP 头部是否允许下划线 # 语法:underscores_in_headers on | off; # 默认:underscores_in_headers off; # 配置块:http、server # If_Modified_Since 头部的处理策略 # 语法:if_modified_since [off | exact | before] # 默认:if_modified_since exact; # 配置块:http、server、location # 文件未找到时是否记录到error日志 # 语法:log_not_found on | off; # 默认:log_not_found on; # 配置块:http、server、location # 是否合并相邻的“/” # 语法:merge_slashes on | off; # 默认:merge_slashes on; # 配置块:http、server、location # DNS解析地址 # 语法:resolver address...; # 配置块:http、server、location # DNS解析的超时时间 # 语法:resolver_timeout time; # 默认:resolver_timeout 30s; # 配置块:http、server、location # 返回错误页面是否在server中注明Nginx版本 # 语法:server_tokens on | off; # 默认:server_tokens on; # 配置块:http、server、location ~~~ 以下是在 Ubuntu 12.04 系统成功安装 Nginx 之后的主配置文件: ~~~ #Nginx服务器正常启动时会读取该配置文件,以下的值都是默认的,若需要可自行修改; #以下是配置选项 #Nginx worker进程运行的用户以及用户组 #语法格式:user username[groupname] #user nobody; #Nginx worker 进程个数 worker_processes 1; #error 日志设置 #语法格式:error /path/file level #其中/path/file是一个具体文件;level是日志的输出级别,其取值如下: #debug info notice warn error crit alert emerg,从左至右级别增大; #若设定一个级别后,则在输出的日志文件中只输出级别大于或等于已设定的级别; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; #保存master进程ID的pid文件存放路径 #语法格式:pid path/file #pid logs/nginx.pid; #事件类配置项 #一般有以下几种配置: #1、是否打开accept锁 # 语法格式:accept_mutex [on | off]; #2、lock文件的路径 # 语法格式:lock_file path/file; #3、使用accept锁后到真正建立连接之间的延迟时间 # 语法格式:accept_mutex_delay Nms; #4、批量建立新连接 # 语法格式:multi_accept [on | off]; #5、选择事件模型 # 语法格式:use [kqueue | rtisg | epoll | /dev/poll | select | poll | eventport]; #6、每个worker进行的最大连接数 # 语法格式:worker_connections number; events { worker_connections 1024; } #以下是http模块 http { include mime.types; default_type application/octet-stream; #log_format main '$remote_addr - $remote_user [$time_local] "$request" ' # '$status $body_bytes_sent "$http_referer" ' # '"$http_user_agent" "$http_x_forwarded_for"'; #access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; #server块 # 每个server块就是一个虚拟主机,按照server_name来区分 server { #监听端口 listen 80; #主机名称 server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; #location语法:location[= | ~ | ~* | ^~ | @] /uri/ {} #location尝试根据用户请求中的URI来匹配 /uri表达式,若匹配成功,则执行{}里面的配置来处理用户请求 #以下是location的一般配置项 #1、以root方式设置资源路径 # 语法格式:root path; #2、以alias方式设置资源路径 # 语法格式:alias path; #3、访问首页 # 语法格式:index file...; #4、根据HTTP返回码重定向页面 # 语法格式:error_page code [code...] [= | =answer-code] uri | @named_location; #5、是否允许递归使用error_page # 语法格式:recursive_error_pages [on | off]; #6、try_files # 语法格式:try_files path1 [path2] uri; location / { root html; index index.html index.htm; } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} } # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443 ssl; # server_name localhost; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_cache shared:SSL:1m; # ssl_session_timeout 5m; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } ~~~ 参考资料: 《深入理解Nginx》 《[Nginx模块开发入门](http://kb.cnblogs.com/page/98352/#section1-2)》 《[Nginx开发从入门到精通](http://tengine.taobao.org/book/index.html)》